In our raised bed garden, we use a growing mixture (not really “soil”) made up of several components, so they must be thoroughly mixed before adding to the garden. Since we’re dealing with a couple hundred pounds in each batch, mixing take a bit of planning. Here’s how we do it:

A large tarp is spread out on the ground. The components are added and mixed one at a time. (Components are shown for illustration only - they are added one at a time.)

A large tarp is spread out on the ground. The components are added and mixed one at a time. (Components are shown on the tarp for illustration only.)

We always start with the Peat Moss. It comes in a compressed bale, so it has to be broken apart until it is all the same consistency. The flat side of a rake is used to spread it out, then just stepping on the chunks breaks it down.

We always start with the Peat Moss. It comes in a compressed bale, so it has to be broken apart until it is all the same consistency. The flat side of a rake is used to spread it out, then just stepping on the chunks breaks it down.

As the rest of the components are added, one at a time, the flat side of an iron rake is used to mix it well before the next component is added. It should be pretty well mixed before the next step of rolling it in the tarp.

At this point, it takes two people. Each holds one corner and then the tarp is folded back onto itself, rolling and thoroughly mixing the components. Go back and forth a couple of times until it is all looks thoroughly mixed.

At this point, it takes two people. Each holds one corner and then the tarp is folded back onto itself, rolling and thoroughly mixing the components. Go back and forth a couple of times until it is all looks thoroughly mixed.

I use a large grain shovel to move the mixture into the raised bed. A 2×4 is dragged across the top to level it out.

Don’t plan on doing more than a couple of batches a day – it takes longer than you might think to do a batch, and it’s pretty heavy work.